I-Helical Tension Dead-end For Conductor

Ukusetshenziswa kanye nezici

I-Helical Tension Dead-end isetshenziswa ekufakweni kwekhondatha eveziwe esetshenziswa ekudluliseni nasekusabalaliseni inethiwekhi kagesi kanye nekhondatha evalekile engaphezulu.Ukuthembeka kanye nenzuzo yezomnotho ingcono kunohlobo lwamanje lwebhawodi kanye nohlobo lokucindezelwa okuqhutshwa ngamanzi i-Tension Dead-end osekukhulunywa ngayo kabanzi kulayini.
Isakhiwo se-Preformed Tension Dead-end silula , futhi isakhiwo sepayipi esakhiwe imilenze emibili yomugqa owakhiwe ngaphambilini sizobopha umqhubi ngokwemvelo futhi sizokhiqiza amandla amakhulu okubamba.Isakhiwo senoveli kanye nomklamo oqondile konke kunomthelela ekuthembekeni kwesethi yokushuba komqhubi.Isethi imvamisa yenziwe ngezikhondatha zensimbi ezinemicu ye-Aluminium-clad concentric-lay-stranded, imicu yocingo lwensimbi nezinye izinto zokwakha.
Umdwebo Womdwebo Wokufakwa Kwe-Tension Dead-end.

Amapharamitha womkhiqizo

I-Preformed Conductor Tension Dead-end ye-ACSR/ Aluminium Stranded Conductor / Insulated Conductor
I-Preformed Ground Wire Tension Dead-end yeMicu Yensimbi Evunyiwe/
I-Concentric-Lay-Stranded Aluminium-Clad Steel Conductor.
Abafana Be-Preformed Tension Dead-end for Galvanized Iron Wire Strands

Qaphela :
1) Ngenxa yokwakhiwa okukhethekile kwe-clamp, i-clamp ingasetshenziswa kanye kuphela ngemva kokubekezelela ukucindezeleka.
2) Uma uthenga imikhiqizo noma i-oda lendawo, imininingwane kanye nohlobo lomqhubi kufanele kuhlinzekwe.
3)I-Joint ayivunyelwe kwi-clamp, kodwa ivunyelwe ku-conductor eceleni kwe-clamp.
I-4) I-Direction of layer yangaphandle kufanele ifane, izinga le-clamp liyisandla sokudla.Uma udinga ukubeka kwesokunxele, sicela usho.

Ukupakisha/ukuthumela/ Imigomo Yokukhokha

Ukupakisha: Ukubamba kwabafana kwangaphambili ngokomkhiqizo kakhonkolo, Imvamisa kupakishwa amabhokisi, amakesi okhuni (njengezidingo zekhasimende)
Ukulethwa: ngokuvamile, kuzothatha cishe amasonto amabili ku-oda lamasethi angu-10000 ukuze kukhiqizwe
Imigomo Yokukhokha : Ngu-T/T